TCx LAB Series

The TC LAB series integrates high-end Digital Control with a precision output current drive stage to offer the best stability temperature control instrument commercially available today.

Additional information

  • Output Current ±5A
  • Compliance Voltage 15V
  • Temp stability better than 0.0009°C
  • Compatible with most sensor types
  • Intuitive user interface touchscreen
  • IntelliTune® PID control
  • Adjustable current limits
  • Over- and under-temperature protection
  • USB, Ethernet interfaces
  • 19" Rack mountable, 2 U half rack

Three models are available driving 5 A (TC5 LAB), 10 A (TC10 LAB) maximum with 15 V compliance, or 15 A (TC15 LAB) maximum with 20 V compliance to the thermoelectric or resistive heater.

PROTECT YOUR THERMOELECTRIC AND LOAD

Safety features protect the thermoelectric [TE] and it’s load. Over and under temperature limits as well as positive and negative current limits can be set. If the sensor signal is lost or a short is detected at the TE, output current is disabled. If temperature limits are exceeded, a signal to the active load can be sent to disable its current. For example, connect the LD Shutdown BNC output to the Active Lock input on Wavelength’s QCL LAB driver and the QCL current will shut down if temperature limits are exceeded. An Auxiliary Sensor can be used to monitor the temperature of the system heatsink.

INTUITIVE USER INTERFACE AND SUPERIOR SOFTWARE CONTROL

With Wavelength’s plug and play instrument, you have the ability to quickly set the controls using either the instrument touch screen or a remote computer, and results are easy to monitor. This allows taking your temperature controlled application from the test bench to market quickly and efficiently.

IntelliTune®: INTELLIGENT AUTOTUNE

Wavelength’s proprietary IntelliTune algorithm characterizes the TE/sensor system’s response to the controller and determines the optimal PID control coefficients. It then automatically adjusts the PID control values as setpoint, tuning mode, or bias current change.

Run IntelliTune easily just off ambient and watch it change PID settings for a much higher or lower setpoint. After a single scan, explore either optimized Setpoint Response or Disturbance Rejection performance with your load to see which works best. Add or remove the D term to see if noise is an issue. IntelliTune lets you skip the manual characterization and it’s smart enough to really work—very little adjustment is needed after you have stored a successful characterization scan.

USEFUL ACCESSORIES

One mating DB 15+2 Thermoelectric and sensor plug is included with the instrument. Single and dual rack mount kits are available. A DB9 mating connector for Status/Enable signals is available (CKT-203). A DB15+2 male connector with hood and high current pin inserts is available (CKT-204). Full cables for the DB9 and DB15+2 are available as WCB405 and WCB406, respectively.

APPLICATIONS

The ultra-stable temperature controller instruments are particularly reliable for research in electro-optical, medical, spectroscopy, and defense systems wherever precision temperature control is required.

Download

TCx LAB DATASHEET.pdf
+44 (0) 1829 773155

Secure payments with PayPal

PayPal and all major credit cards accepted.

Next day delivery for UK webshop orders received before 2pm, subject to stock availability.

Delivery charge for UK webshop orders - £7.50

Non-UK orders - Delivery is based on weight of order

All prices shown exclude VAT and delivery.