LD5TC10 LAB

COMING SOON

LD5TC10 LAB Integrated Laser & Temperature Control Instrument.

Additional information

  • 5 A laser diode and 10 A thermoelectric output current
  • Compliance Voltage: 10 V laser and 15 V TEC
  • Laser current noise: 8.5 μA from 1 Hz to 100 kHz
  • Temperature stability: 0.0009°C
  • IntelliTune® PID temperature control algorithm
  • Safety features for maximum protection
  • Supports thermistors, RTDs, linear current and voltage sensors
  • Supports all laser diode/photodiode configurations
  • Constant Laser Current or Constant Power modes
  • Three photodiode ranges: 0.5, 5, or 100 mA
  • Complete command set for remote control from computer 

COMBINATION LASER DRIVER AND TEMPERATURE CONTROLLER

 

The LDTC LAB series of instruments integrate precision temperature control and low-noise laser current output. The temperature controller half is compatible with a variety of temperature sensors, including thermistors, RTDs, linear current, and linear voltage sensors. The laser driver half is compatible with all laser diode and photodiode pin configurations.

 

Two models are available, the LD2TC5 LAB and the LD5TC10 LAB. The LD2TC5 LAB outputs up to 2 and 5 A for the laser and thermoelectric, respectively. The LD5TC10 LAB outputs up to 5 and 10 A. Both models offer 10 V of laser compliance voltage and 15 V of thermoelectric compliance voltage.

PROTECT YOUR THERMOELECTRIC AND LASER

The instrument comes with a variety of powerful safety features to protect your equipment:

  • Adjustable current limit, with Brick-Wall Never-Exceed circuitry
  • Load failure protection
  • Temperature limits on the load
  • Current/voltage limits for both TEC and laser
  • Automatic laser shutdown upon TEC error available
INTUITIVE USER INTERFACE AND SUPERIOR SOFTWARE CONTROL

With Wavelength’s plug and play instrument, you have the ability to quickly set the controls using either the instrument touch screen or a remote computer, and results are easy to monitor. This allows you to take your application from the test bench to market quickly and efficiently.

IntelliTune®: INTELLIGENT AUTOTUNE

Wavelength’s proprietary IntelliTune algorithm characterizes the TE/sensor system’s response to the controller and determines the optimal PID control coefficients. It then automatically adjusts the PID control values as setpoint, tuning mode, or bias current change.

Run IntelliTune easily just off ambient and watch it change PID settings for a much higher or lower setpoint. After a single scan, explore either optimized Setpoint Response or Disturbance Rejection performance with your load to see which works best. Add or remove the D term to see if noise is an issue. IntelliTune lets you skip the manual characterization and it’s smart enough to really work—very little adjustment is needed after you have stored a successful characterization scan.

USEFUL ACCESSORIES

An Interlock Kit containing a BNC terminator for the laser interlock and a pre-soldered DSUB to satisfy the laser interlocks is included with the instrument. Loose connectors for custom cable configuration (CKL-103, CKT-202, and CKT-204) are shipped with the unit. Full cables for both the laser connection and the thermoelectric connection are available.

APPLICATIONS

The LDTC LAB series of instruments are designed for electro-optical, medical, spectroscopic, and defense research where low-noise laser current is needed along with precision temperature control.

Download

LDTC LAB DATASHEET.pdf
+44 (0) 1829 773155

Secure payments with PayPal

PayPal and all major credit cards accepted.

Next day delivery for UK webshop orders received before 2pm, subject to stock availability.

Delivery charge for UK webshop orders - £7.50

Non-UK orders - Delivery is based on weight of order

All prices shown exclude VAT and delivery.